Blast_545
Published © GPL3+

Funky Super LEDs

Use a MAX32620FTHR to make bright LEDs blink along with the different rhythms of music (embedded Fourier transform).

IntermediateFull instructions providedOver 1 day529

Things used in this project

Hardware components

Resistor 1k ohm
Resistor 1k ohm
×10
Resistor 100 ohm
Resistor 100 ohm
×10
MAX32620FTHR
Maxim Integrated MAX32620FTHR
×1
Super-Bright LED Piranha
I bought the "Multicolor set" that comes with 50Leds, different colors.
×1
Maxim Integrated MAX4466 Microphone Pre-Amp Audio Evaluation Board
×1
Adafruit Bakelite Universal Perfboard
×1
Male Header 40 Position 1 Row (0.1")
Male Header 40 Position 1 Row (0.1")
×1
Adafruit Female header 1x36
×1

Software apps and online services

Arduino IDE
Arduino IDE
Used for programming the board.
Fritzing
Used to draw the solder paths of the custom board prototype.

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

Fritzing file of the designed board

Built board png image

Built board wires

Used for easier replicating of the soldering paths.

Schematics pdf diagram, made using kicad

Code

Main repo of the project

Check the folder Code/Max32620_Funky_Music for the project entry, and the project Code/Arduino%20examples to see some max32620 simpel functionality examples.

Credits

Blast_545

Blast_545

2 projects • 1 follower
Electronics engineer. Freelancer, IoT and embedded firmware solutions. Interested in robotics, artificial intelligence and IoT new trends.

Comments