Bill Shaw
Published © GPL3+

Real-time GPS Tracking and Mapping

Design and build a mobile tracker. Ultimately, this will go in the car to keep track of mileage.

IntermediateFull instructions provided3 hours3,133

Things used in this project

Hardware components

Seeed Xadow GPS v2
×1
Avnet AT&T IoT Starter Kit
×1
Breadboard (generic)
Breadboard (generic)
×1
Male/Male Jumper Wires
I used four of these. If you solder the GPS directly using hookup wire, you won't need these or the breadboard. I would definitely do that before deploying this for real.
×1
Male Header 40 Position 1 Row (0.1")
Male Header 40 Position 1 Row (0.1")
You only need 6 positions (3 x 2) for the GPS.
×1

Software apps and online services

PubNub Publish/Subscribe API
PubNub Publish/Subscribe API
AT&T IoT M2X Platform
AT&T Flow
AT&T Flow
ARM mbed
Mapbox

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

GPS Wiring

Code

Mileage tracking with the AT&T Starter Kit and Seeed GPS.

Integrate SeeeStudio Xadow GPS v2 and track mileage in our vehicle with the AT&T IoT Starter Kit.

Credits

Bill Shaw

Bill Shaw

3 projects • 13 followers
Founder of Tampa Hackerspace. I build robots and dabble in everything else.

Comments